Where are they used?
Open Frame Series
Keep Solenoid Series
Flapper Solenoid Series
Solenoid Valve Series
Tubular Solenoids
Product Inquiry
2-5-5, Shinmei-cho, OKAYA, Nagano,
394-0004, Japan
TEL: +81-266-23-4517
FAX: +81-266-23-4523
Access
Top Page > Contact Us
Inquiry

Contact Us

Feel free to contact us for any questions.

Contact Us Online Download Excel

Online Inquiry for Customized Solenoids

step
Fill out the form below and click "Confirm" button.

*The fields with asterisk (*) marked in red are required. Please make sure to fill out so that we can contact you certainly.
*Do not use unit symbols or special characters, such as circled numbers, roman numbers, cm or kg, because characters may be garbled.

・ Your input information will be used only for the purpose of responding to your inquiry, not for other purposes (direct mail or emails).
・ Your private information is protected by the strict control of TDS, not disclosing to anyone else.
・ Your inquiry by phone, fax or mail is welcomed.

Company Name e.g.　XYZ Corporation
Name* e.g.　Taro TDS
Position e.g.　Product Development
Postal Code* e.g.　1230000
Address* e.g. Street, City, State
Country* e.g. Country
Telephone* e.g. country code + your number
FAX e.g. country code + your number
Email Address* e.g. 　tds@tdsjp.co.jp
About Your Product In Product Development　　 In Production Review
 Provide as much information as possible.
Launch Timing
Estimated Volume
Application


Please provide us as many details as possible about your operating conditions for TDS to provide you the best suited and economical Solenoid.
Please fill in the part number if known.
Part Number
TDS-
Operating Conditions
Operating Voltage
DC V (MAX DC V・ MIN DC V)
(Please inform us the type of the power supply.)
Rated Current
A MAX (when DC V) at Ambient Temp. of 20℃
DC Resistance
Ohm (+/- 10%) at Ambient Temp. of 20℃
Operating Ratings
Continuous Duty　　　 Intermittent Duty

Intermittent Duty Cycle %　 　ON
  %　 　OFF
Characteristics
Pull Force
DC V (MAX DC V・ MIN DC V)
(Please inform us the type of the power supply.)
Stroke 0mm N (gf)
  mm N (gf)
  mm N (gf)

*　After selecting one of the below, fill out the information.
When DC V is applied at Ambient Temp. of ℃
When DC V is applied constantly for minutes, DC V is applied at Ambient Temp. ℃
When DC V is applied, ON for , OFF for , operate for Min. And, DC V is applied at Ambient Temp. of ℃
Noise Reduction
* Please check one.
Yes No　
Withstand Voltage
AC V for 1 min. (at Normal Temp. and Humidity)
Insulation Resistance
DC V andM Ohm MAX (at Normal Temp. and Humidity)
Life
times
Applicable Standard
*　Please select applicable standard (s).
Electrical Appliance and Material Control　Law UL (Flame-retardant gradeMIN.)　
CSA　 Other standard 　
Orientation
Solenoid Orientation
*　Please select Solenoid Orientation
Vertical Horizontal　 Others
Others
Temperature Rise
Coil Temp K MAX when Ambient Temp. ℃ and DC V is applied.
　　　　　　*　Operation rating determines Temp. Rise
Residual Magnetism
Plunger weight gf(N) MAX.
Coil Insulation Grade
*　Please select Coil Insulation Grade
Class A (105 ℃) Class E (120 ℃) Class B (130 ℃)
Information about your project
Application
Planned Timing
Planned Lot Volume
Delivery Point　
Please fill in the part number if known.
Part Number
TDS-K
Operating Conditions
Operating Voltage
DC V (MAX DC V・ MIN DC V)
Condenser Discharge(Condenser：、 VS applied)
Rated Current
A MAX (when DC V) at Ambient Temp. of 20℃
DC Resistance
Ohm (+/- 10%) at Ambient Temp. of 20℃
Operating Ratings
Intermittent Duty Cycle ％
　Energized time for Pull: ON 　OFF
　Energized time for Release: ON 　OFF
Characteristics
Pull Force
Stroke mm N (gf)
  mm N (gf)
  mm N (gf)
Non-excitation Holding Force   N (gf) MIN.

*　After selecting one of the below, fill out the information.
When DC V is applied at Ambient Temp. of℃
After Temp. rise, DC V is applied at Ambient Temp. of ℃

Releasing Load N ( gf) MIN
  N ( gf) MIN
  (Back tension when pulled.)
Noise Reduction
*　Please check one.
Yes No　
Withstand Voltage
AC V for 1 min. (at Normal Temp. and Humidity)
Insulation Resistance
DC V andM Ohm MAX (at Normal Temp. and Humidity)
Life
times
Applicable Standard
*　Please select applicable standard (s).
Electrical Appliance and Material Control　Law UL (Flame-retardant gradeMIN.)　
CSA　 Other　
Orientation
Solenoid Orientation
*　Please select Solenoid Orientation.
Vertical Horizontal　 Others
Others
Temperature Rise
Coil Temp K MAX when Ambient Temp. ℃ and DC 　 V is applied.
　　　　　　*　Operation rating determines Temp. Rise.
Coil Insulation Grade
*　Please select Coil Insulation Grade.
Class A (105 ℃) Class E (120 ℃) Class B (130 ℃) 　
Information about your project
Application
Planned Timing
Planned Lot Volume
Delivery Point
Please fill in the part number if known.
Part Number
TDS-F
Operating Conditions
Operating Voltage
DC V (MAX DC V・ MIN DC V)
(Please inform us the type of the power supply.)
Rated Current
A MAX (when DCV) at Ambient Temp. of 20℃
DC Resistance
Ohm (+/- 10%) at Ambient Temp. of 20℃
Operation Rating
Continuous Duty　　 Intermittent Duty　 　

Intermittent Duty Cycle %　 　ON
  %　 　OFF
Characteristics
Pull Force
Stroke (Position of Actuator Plate) mm N (gf)
  mm N ( gf)
  mm N (gf)

*　After selecting one of the below, fill out the information.
When DC V is applied at Ambient Temp. of ℃
After DC V is applied constantly for minutes, apply DC　 V is applied at Ambient Temp. ℃
When DC V is applied, ON for , OFF for , operate for min. And,　 V is applied at Ambient Temp. of ℃
Withstand Voltage
AC V for 1 min. (at Normal Temp. and Humidity)
Insulation Resistance
DC V andM Ohm MAX (at Normal Temp. and Humidity)
Life
times
Applicable Standard
*　Please select applicable standard (s).
Electrical Appliance and Material Control　Law　 UL (Flame-retardant gradeMIN.) 　 CSA　 Other standard
Orientation
Solenoid Orientation
*　 Please select Solenoid Orientation.
Vertical Horizontal　 Others
Others
Temperature Rise
Coil Temp K MAX when Ambient Temp. ℃ and DC V is applied.
　　　　　　* Operation rating determines Temp. Rise.
Coil Insulation Grade
*　Please select Coil Insulation Grade.
Class A (105 ℃) Class E (120 ℃) 　 Class B (130 ℃)
Information about your project
Application
Planned Timing
Planned Lot Volume
Delivery Point
Please fill in the part number if known.
Part Number
TDS-V
Operating Conditions
Operating Voltage
DC V (MAX DC V・ MIN DC V)
(Please inform us the type of the power supply.)
Rated Current
A MAX (when DCV) at Ambient Temp. of 20℃
DC Resistance
Ohm (+/- 10%) at Ambient Temp. of 20℃
Operating Ratings
Continuous Duty　　　 Intermittent Duty

Intermittent Duty Cycle %　 　ON
  %　 　OFF
Characteristics
Characteristics
(1) Type of fluid (e.g., Air, Ink, Water)
(2) Specified rubber material
(3) Estimated operating pressure 　(unit: kPa kg/cm2 mmHg mmH2O )
(4) Estimated operating pressure range ～ 　(unit: kPa kg/cm2 mmHg mmH2O )
(5) Estimated leakage spec 　(unit: kPa kg/cm2 mmHg mmH2O )/min
(6) Type of solenoid valve Normal Close (NC) Normal Open (NO)
Withstand Voltage
AC V for 1 min. (at Normal Temp. and Humidity)
Insulation Resistance
DC V and M Ohm MAX (at Normal Temp. and Humidity)
Life
times
Applicable Standard
*　Please select applicable standard (s).
Electrical Appliance and Material Control　Law UL (Flame-retardant gradeMIN.)　
CSA　 Other　

Orientation
Solenoid Orientation
*　Please select Solenoid Orientation
Vertical Horizontal　 Others
Others
Temperature Rise
Coil TempK MAX when Ambient Temp. ℃ and DC V is applied.
　　　　　　*　Operation rating determines Temp. Rise.
Coil Insulation Grade
*　Please select Coil Insulation Grade
Class A (105 ℃) Class E (120 ℃) Class B (130 ℃)
Information about your project
Application
Planned Timing
Planned Lot Volume
Delivery Point


Back to Top

If you wish to fill out the form later,

Please download the excel file on the right, fill out required information, and submit it by email.


Back to Top